SHF - 8103 Red Bluff Rd - Pasadena TX 77507

832 456 2000

CUSTOM STAINLESS FITTINGS

Stainless Hose Fittings has achieved international recognition for providing high quality and custom made fittings to a wide range of market sectors and industries.


Our in-house fabrication department is composed of highly trained professionals equipped with the latest processing and welding equipment.

EXAMPLE #1

Description: The threads were removed from the Lifesaver and the MJIC was removed from the Flange Adapter before being welded together.


Parts Used: Lifesaver, 1704 MJIC Code 61 Flange 90° Adapter


Finished Product: SHF43-20-20FL90


#1: Before/after picture of the Lifesaver. You can see where the threads have been machined off and counterbored.


#2: Before/after picture of the 1704 MJIC Code 61 90° Flange Adapter. The Male JIC and threads have been removed.


#3: Assembled before being welded


#4: Assembled and welded, this is the finished product.

EXAMPLE #2

Description: A Female JIC Weld-On and a 2403 Male JIC x Male JIC Adapter were used in this job. The Weld-On's HEX O.D. was machined down to a specific O.D.. One end of the 2403 Male JIC x Male JIC Adapter was machined off at the HEX then counterbored to accept the Female JIC Weld-On.


Parts Used: SHFWO-FJ, 2403 MJIC x MJIC


Finished Product: Adapter 6402 - MORB x FJIC Swivel


#1: Both the SHFWO-FJ Weld-On and a 2403 MJIC x MJIC Adapter before any custom work performed.


#2: Assembled before being welded, you can see where the Weld-On was machined down to a specific O.D., and the 2403 Adapter was machined off at the HEX.


#3: Assembled and welded, this is the finished product.

EXAMPLE #3

Description: 2 Weld-On's were used in this example. A Male Pipe and a Female JIC. The Female JIC was machined down to a specific O.D.. The Male Pipe was bored to a specific I.D.


Parts Used: SHFWO-12MP, SHFWO-10FJ


Finished Product: Adapter 6505 - MP x FJIC Swivel


#1: Both fittings before machine work


#2: Both fittings after machine work. The Male Pipe was bored to a specific I.D. and the Female JIC was machined to a specific O.D.


#3: Both fittings assembled after machine work but before weld.


#4: Picture of both fittings after being welded, this is the completed product