SHF - 8103 Red Bluff Rd - Pasadena TX 77507

832 456 2000

STAINLESS STEEL FLARESAVER SEALS FOR MJIC 37°


The cost of servicing leaking fittings, downtime for machinery, facility cantamination and high evironmental clean-up costs were the driving forces behind the development of the Flaresaver Seal.

Flaresaver Seals use the unique combination of the stainless steel insert stamping and Loctite Sealant. Loctite is the world's leader in sealing compounds, and the Flaresaver Seal is the ultimate solution for eliminating leaking gas or fluid from flared tube and hose connections.

Flaresaver Seals are available in two grades of stainless steel or copper material. The Loctite coating compound can be standard or high temperature. Flaresaver Seals are available in sizes ranging from 3/16" to 2" fitting sizes.

Key Design Features

* Targets the most vulnerable point in piping systems: flared joints between tubing, hose and their fittings.

* Unique combination of patented sealing rings and baked-on Loctite sealant makes "Leak-Free" connections.

* Loctite coating minimizes galling and metal deterioration in the metal flare from tightening the fitting and from corrosive electrolysis, especially, in difficult marine applications.

(Flaresaver seals fit standard JIC-37, SAE-45, and JIS-30 flare fittings, and our patented clip keeps them in place.

* Low cost method of eliminating costly rework of leaking connections.

PART NO.
FS-04
FS-06
FS-08
FS-10
FS-12
FS-16
FS-20
FS-24
FS-32

SIZE
1/4
3/8
1/2
5/8
3/4
1
1 1/4
1 1/2
2